Stock Number: 212519
Make: JLG
Model: 1932RS
Year: 2014

Stock Number: 2-16-266158
Make: Terex-Comedil
Model: CTT561-20 HD23
Year: 2004

Stock Number: 232193
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013

Stock Number: EQC011396
Make: Genie
Model: Z60/34
Year: 2010

Stock Number: EQU004971
Make: Taylor
Model: T330M
Year: 2003

Stock Number: EQU007691
Make: Ottawa
Model: 30
Year: 2013

Stock Number: 2-18-UEF101
Make: Misc
Model: FORKS

Stock Number: 2-16-600283
Make: Liebherr
Model: 245 ECH
Year: 1997

Stock Number: 1-16-232265
Make: Spyder
Model: URW295
Year: 2014

Stock Number: 300282
Make: CAT
Model: GP30N5
Year: 2015

Stock Number: 268560
Make: CAT
Model: DP70 CAB

Stock Number: 206524
Make: Hyundai
Model: 160D-7E
Year: 2012

Daewoo IC Forklifts

Daewoo IC Forklifts

Inspect a Forklift
HRSDC and OSHA report that more than 10,000 workplace injuries related to fork lifts happen each year. Operator error is the reason for many of these mishaps. Lack of appropriate equipment maintenance and check causes numerous others. Operation and maintenance of a forklift is not only the reason for personal injuries, but also of damage to property. Forklifts can damage sprinklers, building structures and overhead pipes, and other equipment when incorrectly utilized. The following day by day inspections should be carried out in order to reduce the likelihood of forklift accidents.

Turn off the engine prior to inspecting various fluid levels: fuel, engine oil, coolant, brake fluid and hydraulic oil. The tires must be inspected for signs of wear and tear. Check the air pressure in the tires. Check the condition of the forks. The load backrest should be attached securely. Do a visual inspection of the top-clip retaining heel and pin. After that perform an inspection of the hydraulic hoses, mast chains, cables and stops. Make certain that both the finger and overhead guards are firmly attached.

The LP powered forklift has propane tanks that have to be inspected for corrosion, damage or rust. The battery's electrolyte levels and charge have to be tested periodically. Seat belts have to be inspected for wear and tear. Check to make sure the owner's handbook is stored on-board the forklift inside a storage compartment. Test the seat belt to make sure the latches are secure. Check the hood latch to ensure it is functioning as it should.

To make sure there are no unusual engine sounds, start the engine up and listen for any irregularities. If there are, investigate immediately. Test the steering controls and the accelerator. The service brake and the parking break must be functioning properly.

The tilt control and drive control should be checked to guarantee proper functioning in both reverse and forward. Test the functioning of the lowering control and hoist, and the attachment control. Test the lights and horn. After that check the defroster, wipers and heater to make sure they are functioning smoothly. Inspect every gauge to find out that it is reading within functional limits.

  • TCM Dual Fuel Forklifts
    Safety using a lift truck needs to be a top priority if you are going to utilize a forklift or would hire somebody to use a forklift. ... More
  • Wolff Self Erect Cranes
    Kinds of Jib Cranes The trolley hoist on a horizontal load-bearing boom are key features on Jib cranes. The boom is secured to a ... More
  • Mitsubishi LP Forklifts
    The lift truck has become such an important piece of machinery found and utilized in most warehousing and industrial operations, ever ... More
  • FM GRU Tower Cranes
    Established during 1920, FM GRU Tower Cranes started as a family business in the Northern Italy's largest industrial location. ... More
  • Manitou Cushion Tire Forklift
    For work trucks, or course there are a varieties of different forklift parts, with one of the most important components is the ... More