Stock Number: EQC008511
Make: Manitou
Model: MRT2150
Year: 2014


Stock Number: 266365
Make: Yale
Model: GDP090
Year: 2007


Stock Number: 231493
Make: WackerNeuson
Model: WK HI400HD D
Year: 2012


Stock Number: EQC004696
Make: JLG
Model: 1930ES
Year: 2011


Stock Number: 301327
Make: Hyster
Model: H700F
Year: 2003


Stock Number: EQU004014
Make: Clark
Model: OP15
Year: 1987


 
Hyundai IC Forklifts

Hyundai IC Forklifts

Inspect a Forklift
According to HRSDC and OSHA statistics, there are about 10,000 forklift-related worklplace injuries each year within North America. Some injuries are caused by the lack of correct equipment inspection and maintenance of the machine. Other injuries are due to operator error.

Injuries are not the only issues which are related to the maintenance and operation of forklifts. One more serious concern is property damage. Lift truck accidents could lead to damage to overhead pipes, sprinklers, and other machines as well as building walls. By completing thorough inspections on a daily basis, you can help reduce forklift injuries.

You should first turn the engine off before inspecting the forklift. Check the levels of the engine oil, fuel, brake fluid, hydraulic oil and coolant. Visually inspect the machine's tires looking for signs of wear, general condition and correct air pressure. Visually check the forks on the front of the machinery as well. Confirm the condition of the top-clip retaining pin and heel. Make sure that the backrest is attached firmly. Confirm that the finger guard and overhead are attached. Visually check the stops and cables, the hydraulic hoses and the mast chains as well.

You should inspect the propane tank if you are using liquid propane of LP forklifts. Check for any signs of corrosion, damage or rust. Be sure that the battery has enough levels of electrolyte and which is adequately charged. Visually check all belts. Check to confirm the location of the owner's handbook and make sure it is situated in the designated on-board storage compartment. Verify the hood latch and confirm that it is operating as it is supposed to. Check the seatbelt and make certain it is functioning correctly and securely latches.

You could turn the engine on after you have done all the steps mentioned above. Listen carefully to the engine. Investigate any unusual sounds immediately. Make sure that both the service brake and the parking brake are correctly working. Make certain that the steering controls and the accelerator are functioning at optimum performance levels.

  • TCM Dual Fuel Forklifts
    Safety using a lift truck needs to be a top priority if you are going to utilize a forklift or would hire somebody to use a forklift. ... More
  • Wolff Self Erect Cranes
    Kinds of Jib Cranes The trolley hoist on a horizontal load-bearing boom are key features on Jib cranes. The boom is secured to a ... More
  • Mitsubishi LP Forklifts
    The lift truck has become such an important piece of machinery found and utilized in most warehousing and industrial operations, ever ... More
  • FM GRU Tower Cranes
    Established during 1920, FM GRU Tower Cranes started as a family business in the Northern Italy's largest industrial location. ... More
  • Manitou Cushion Tire Forklift
    For work trucks, or course there are a varieties of different forklift parts, with one of the most important components is the ... More