Forklift Battery Charging and Safe Installation
Batteries utilized in forklifts are expensive pieces of machinery that are fairly big weighing many pounds. The job of installing and charging these batteries is something which must be planned out ahead of time so as to make certain that these methods are able to be done safely and properly. Maintaining correct handling and a sound charging method could majorly increase the battery's usual life span.
It is suggested that the battery is not connected to the charger until it is at or less than 20% capacity. By charging the battery when it is more than 20%, the battery's lifespan can really be shortened. On roughly each 5th charge cycle, the charger must be set on the weekend or equalize setting, depending on what model of charger you are using.
The charging cycle must never be interrupted. As soon as the charge cycle is done, you should avoid utilizing the battery for some hours. By practicing these methods, you can help make certain that you get the maximum battery performance available.
Make sure the charger is turned off prior to hooking up the battery to the charger. You then could connect the charger to the battery. This is a common error which could inadvertently cause damage to both the charger and the forklift. It is also really essential that the battery amperage should match that of the charger.
Do not ever allow the battery to completely discharge or to deep discharge. This would shorten the battery life greatly and may even prevent the charger from being able to start. If the battery charger reads that there is no activity in the battery, it will not start the charge cycle. If this situation happens, a technician would have to be called in order to re-set the charger prior to charge being able to start.