It is completely different to operate a stand-up forklift as opposed to a sit-down model. The way you move and lift cargo in addition to your movements are totally different. If you do not have correct training for operating a stand-up unit, you can possibly cause harm co-workers or to yourself. When using a stand-up model, you need to follow the proper safety regulations. There are several basic operating standards that need to be met when utilizing a stand-up unit.
To begin on a stand-up model forklift, it is important to get a good feel for the controls and the steering knob. Instead of a steering wheel, the steering is handled with the knob steering plate. Take note that this knob moves really fast, hence, you should get used to moving it carefully so as to be sure not to over steer. The horn is situated on the control handle, like with the control for the fork movement and for forwards, backwards. The floor pedal enables the forklift power to move.
If you are set to start, turn the key to start the forklift. Be sure that your forks are not extended. If you are moving around the floor, the forks must be pointed a little upwards. Do not drive with the forks in their extended position. If you are traveling forwards, move the control handle forward and step on the pedal to make the lift move forward. If you are backing up, be certain to beep your horn to alert individuals around you. Look behind you before stepping on the pedal in order to make sure the way is clear and safe. After that, while stepping on the pedal, pull the control handle towards you. Always stay focused and alert and make sure that you are always operating in a safe manner.
When approaching a corner with the lift truck, turn the steering knob towards the direction you are heading. Make sure to keep your hands on the control handle and keep your foot on the accelerator. When turning right, the steering knob would move in a clockwise direction during forward travel. If you are turning left, your steering knob will go in a counter-clockwise direction.
If you have only utilized sit down units, the stand-up versions can take some getting used to. With some training and taking some time to know the equipment, you could handle loads quickly and efficiently in little time.