Change a Propane Tank
Propane powered forklifts are normally used in warehouses. The lift truck is made with the propane tank mounted at the back of the operator. The tanks, which look much like beer kegs, need to be replaced from time to time since they have a limited lifespan. Forklift drivers must utilize care when handling propane tanks. Compressed gases are hazardous, specially since the gas is flammable. Utilize caution when replacing and removing propane tank to prevent injury.
1 If there is a need to change the propane tank, the first step is to stop the lift truck, then turn off the tank valve. The lift truck must be left on until the engine dies. This process burns off the gas in the transfer hose that connects the engine and the tank. Before taking the next steps, put on the proper safety equipment, like insulated gloves made of either leather or neoprene. It is really important for you to protect your skin from contact with the compressed gas, which is very cold.
2 The hose of the tank has to be disconnected, followed by removing the tank from its holding straps. When you put in a new tank, tighten the nut to reconnect the holding straps and to reattach the hose at the valve of the tank.
3 Leaks can be inspected just by applying soapy water to the valve and opening it slightly. If there is a leak, it would cause bubbles to froth from around the valve. If this happens, check the valve area and the connection hose at the nut. Re-tighten the connecting nut if you detect any leaks in the area of the valve, and then perform the leak inspection procedure again. Persistent leaks mean that the nut and connecting hose should be replaced. Nevertheless, if replacing the hose and nut still does not stop the leak, the tank should be replaced.
4 Finally, open the valve all the way to enable the gas to fill the connecting hose. After that you can start the forklift and continue working.