Call Toll Free -  888-670-1195
Stock Number: 2-18-UEF64
Make: Misc
Model: FORKS
Stock Number: 2-18-UEF28
Make: Misc
Model: FORKS
Stock Number: 2-16-230162
Make: Terex-Comedil
Model: CBR36H-4
Year: 2006
Stock Number: EQC003757
Make: CAT
Model: DP100
Year: 2005
Stock Number: EQU006814
Make: Kalmar
Model: DCE160-9
Year: 2012
Stock Number: EQC012157
Make: Tico
Model: ProSpotter
Year: 2018
 
Used Nissan Forklifts - Inventory Massachusetts top

Used Nissan Forklifts - Inventory Massachusetts

During the latter part of the 1990's, a Nissan Propane Forklift would have cost approximately $11,000 to $14,000 to purchase a brand new one. You can now purchase a used model with this amount, with fewer than 5,000 operating hours and has about 15 feet of lifting capacity and cushion tires. On the other hand, a used Nissan forklift truck which has less than 5,000 hours can be found for less than $7,000. This option may be a little bit of an older model than some others, but remember; everything revolves around the operating hours. A model such as this will most likely have a fairly good load capacity of approximately 5,000 pounds.

Newer Nissan forklifts from the year 2005 to the current year, could be found priced near $10,000. Typically, these models will have a regular lift capacity ranging from 4,000 to 5,000 lbs. Normally, a model similar to this would have cushion tires and run smoothly. Of course, newer models normally run smoother compared to older ones.

Types of Forklifts
Usually, forklifts are categorized in 2 particular ways: by the type of fuel it takes and the structure of the forklift. Based on structure, the following kinds of lift trucks are among the most common:

Standard Forklift: The standard forklift comprises the regular warehouse machines we are all familiar with. These forklifts provide a lifting capacity of 3,000 to 5,000 lbs. They have a height capacity of roughly 20 feet.

Reach Forklift: Often referred to as a narrow aisle forklift, the reach forklift is the kind of equipment which is found within distribution centers and warehouses where space is at a premium. Narrow construction means that it is not able to carry as much as a standard forklift model, however, it has an extendable mast that can easily lift loads about 40 feet.

Telescopic Forklift: Telescopic forklifts are also known as telehandlers, extendable reach forklifts or a telescopic handler. These types forklift trucks are a more heavy-duty and rugged version of a regular lift truck. These units offer a telescopic boom that could be raised up and extended out. Usually, these units are used on rough terrain. They are able to can handle loads up to 70 feet high

Straight Mast Forklift: Straight mast lift trucks are also normally utilized in rough terrain applications. These kinds of forklifts are only capable of transporting loads vertically, not like a telescopic unit. These units could lift loads up to 12,000 lbs, while reaching a height of 10 to 30 feet.

Nissan PD155H
The PD155H model in Massachusetts is produced by the company Nissan is a two wheel drive lift truck. This model has a diesel powered engine and has the capacity to lift a max weight of 15500 lbs...
Nissan PFD100H
The PFD100H in Massachusetts is produced by Nissan is a two wheel drive lift truck. This model has a diesel and propane powered engine and has the ability to lift a maximum weight of 10000 pounds...
Nissan PF100YLP
The model PF100YLP in Massachusetts is manufactured by Nissan is a two wheel drive lift truck. This unit has a diesel and propane powered engine and has the capacity to lift a max weight of 10000 pounds...
Nissan JP110H
The JP110H model in Massachusetts is manufactured by the company Nissan is a two wheel drive lift truck. This model has a diesel and propane powered engine and has the capability to lift a maximum weight of 11000 lbs...
Nissan PFD110H
The PFD110H in Massachusetts is built by the company Nissan is a two wheel drive lift truck. This unit has a diesel powered engine and has the ability to lift a maximum weight of 11000 pounds...
Nissan JP100BYLP
The JP100BYLP model in Massachusetts is built by Nissan is a two wheel drive lift truck. This unit has a diesel and propane powered engine and has the ability to lift a maximum weight of 10000 lbs...

The order pickers manufactured by Nissan are based on a modular design in order to offer owners and operators the most cost-effective solutions to the widest range of demands within the warehousing industry...

There are 7 various classifications of lift trucks as determined by the ITA or Industrial Truck Association. These categories are divided into the type of work setting; indoors, outdoors, rough or smooth surfaces and narrow aisle; whether the operator is sitting down or standing; by the kind of engine; and lastly the equipment characteristics, regarding the maximum grade and kind of tire...

The head office for the South and North division of Nissan forklifts is based out of Marengo, Illinois. There are around 350 staff who work to manufacture and design several of the best forklifts within the world...
Used Nissan Forklifts - Inventory Massachusetts bottom left Used Nissan Forklifts - Inventory Massachusetts bottom left